ARRANGEMENT OF SECTIONS
PART I
Preliminary
SECTION
1. Short title and extent.
- Interpretation.
- Power to grant permit to survey and oil pipeline licence.
PART II
Permit to survey
- Permit to survey.
- Effect of permit to survey.
- Notice before entry, damage, compensation, etc.
PART III
Oil pipeline licence
PART IV
Compensation
- Oil pipeline licence.
- Application for licence and notice thereof.
- Notice of objection.
- Inquiry and report thereafter.
- Rights and obligations of the holder of a licence.
- Power to impose restrictions on use of adjoining lands
- Deviations
- Restrictions in respect of certain public facilities.
- Restrictions upon entry in respect of venerated land.
- Obligations in respect of accommodation works.< /li>
- Terms and conditions of licences.< /li>
- Use of oil pipeline by a person other than the owner.
- Court having jurisdiction as to compensation.
- Basis of assessment of compensation.
- Compensation where local community interested.
- Parties in possession as owners to be deemed entitled to lands.
- Exoneration upon payment.
PARTV
Miscellaneous
SECTION
- Proceedings where possession of land withheld.
- Penalty for hindering the taking possession of lands, etc.
- Deviation when land required for public purpose.
- Effect of breach of terms or conditions.
- Disposal of pipeline and installations on termination of licence.
- Sale of licence by court to be approved by Minister.
- Effect of this Act upon other enactments.
- Fees.
- Offences by bodies corporate.
- Regulations.
- Delegation of powers of Minister.
[NOTE.- The measurements used in this Act are Irnperial measurements; and they are to be converted into metric measurements as and when required.]
An Act to make provision for licences to be granted for the establishment and main-
tenance of pipelines incidental and supplementary to oil fields and oil mining, and for purposes ancillary to such pipelines.
[1956 No. 31.1965 No. 24.]
[4th October, 1956]
[ Commencement.]
PART I
Preliminary
1. Short title and extent
This Act may be cited as the Oil Pipelines Act and shall apply throughout the Federa-
tion.
- Interpretation
In this Act, unless the context otherwise requires-
“licence” means an oil pipeline licence granted under the provisions of this Act;
“Minister“ means the Minister charged with responsibility for matters relating to oil-
fields and oil mining;
“oil pipeline” has the meaning given to it in section 11 (2) of this Act.
- Power to grant permit to survey and oil pipeline licence
The Minister may, subject to the provisions of this Act grant-
(a) permits to survey routes for oil pipelines; and
(b) licences to construct, maintain and operate oil pipelines:
Provided that each licence shall be issued in respect of and authorise the construc-
tion, maintenance and operation of one pipeline only.
PART II
Permit to survey
- Permit to survey
(1) Any person may make an application to the Minister in accordance with the pro-
visions of this Act and of any regulations made thereunder for the grant of a permit to
survey the route for an oil pipeline for the transport of mineral oil, natural gas, or any
product of such oil or such gas to any point of destination to which such person requires
such oil, gas or product to be transported for any purpose connected with petroleum trade
or operations.
(2) Every application for a permit to survey shall specify the approximate route or
alternative routes proposed.
(3) The Minister may-
(a) grant the permit to survey on payment of the fees required by section 31 of this
Act to be paid by the applicant on the submission of the application and on
grant of the permit to survey respectively; or
(b) for reasons which to him appear sufficient, refuse to grant the permit to survey.
(4) If the Minister refuses to grant the permit to survey he shall notify the applicant in
writing of such refusal and the reasons therefore.
- Effect of permit to survey
(1) A permit to survey shall entitle the holder, subject to the provisions of section 6
of this Act, to enter together with his officers, agents, workmen or other servants and with
any necessary equipment or vehicles, on any land upon the route specified in the permit
or reasonably close to such route for the following purposes-
(a) to survey and take levels of the land;
(b) to dig and bore into the soil and subsoil;
(c) to cut and remove such trees and other vegetation as may impede the purposes specified in this subsection; and
(d) to do all other acts necessary to ascertain the suitability of the land for the establishment of an oil pipeline or ancillary installations,
and shall entitle the holder, with such persons, equipment or vehicles as aforesaid, to pass
over land adjacent to such route to the extent that such may be necessary or convenient
for the purpose of obtaining access to land upon the route specified.
(2) The Minister may, upon application by the holder of a permit to survey, vary the
route specified in such permit, but such variation shall not invalidate or make illegal any
act done by the holder pursuant to the permit prior to such variation, nor prejudice the
rights of any person under this Act with reference to any act done by the holder pursuant
to the permit prior to such variation.
- Notice before entry, damage, compensation, etc.
(1) Except with the previous consent of the owner or occupier, no person shall under
the authority of section 5 of this Act enter any building or upon any enclosed court or
garden attached to any building, without previously having given the owner or occupier
at least fourteen days’ notice of his intention to do so, nor enter upon any cultivated land
without having given such notice to the owners or occupiers thereof or having affixed
such notice in some prominent position upon such land.
(2) No person shall under the authority of section 5 of this Act enter any of the lands
described in section 15 of this Act except with the prior assent of the owners or occupiers
or persons in charge of such lands.
(3) The holder of a permit to survey acting under the authority of section 5 of this Act
shall take all reasonable steps to avoid unnecessary damage to any land entered upon and
any buildings, crops or profitable trees thereon, and shall make compensation to the own-
ers or occupiers for any damage done under such authority and not made good.
(4) In the event of dispute as to the amount of compensation to be paid or as to
whether or to whom any compensation shall be paid, the provisions of Part IV of this Act
shall apply.
PART III
Oil pipeline licence
- Oil pipeline licence
(1) The holder of a permit to survey may make an application to the Minister in ac-
cordance with the provisions of this Act and of any regulations made thereunder for the
grant of an oil pipeline licence in respect of any oil pipeline the survey of the route for
which has been completed by the applicant.
(2) The Minister may-
(a) grant the licence on payment of the fees required by section 31 of this Act to
be paid by the applicant on the submission of the application and on the grant
of the licence respectively; or
(b) for reasons which the Minister considers sufficient, refuse to grant the licence.
(3) If the Minister refuses to grant the licence, he shall notify the applicant in writing
of such refusal and the reasons therefore.
(4) No person other than the holder of a licence shall construct, maintain or operate
an oil pipeline.
(5) Every person who acts in contravention of subsection (4) shall be guilty of an of-
fence and shall be liable on conviction to a term of imprisonment not exceeding two
years or to a fine not exceeding N1,000 or to both such imprisonment and such fine.
(6) The Minister may require any person who is convicted of an offence under this
section to have the pipeline in respect of which the offence was committed and any an-
cillary installation removed to the extent that the Minister does not elect to purchase such
pipeline or any such installation or any part thereof; and in the event of failure to agree on
the purchase price the same shall be determined by arbitration.
(7) An offender who is required by the Minister under subsection (6) of this section
to have a pipeline or any ancillary installation removed shall make good any damage
done to any land by such removal.
- Application for licence and notice thereof
(1) An applicant for a licence shall deliver to the Minister an application for the same
stating the terminal points and giving a description of the pipeline and accompanied by a
plan of the proposed route of the pipeline sufficient to identify the land affected thereby
and the position of any pumping stations, tanks or other ancillary installations.
(2) The Minister shall upon receipt of the application under subsection (1) of this
section appoint a date not less than six weeks ahead for the hearing of objections, if any,
and shall nominate the person or persons by whom and the place or places at which any
such objections shall be heard, and shall thereupon cause a notification of such date and
other particulars and of the places at which objections shall be lodged to be made in the
Federal Gazette and in the Gazette of each State concerned.
(3) Before or upon application being made in accordance with subsection (1) of this
section notice of the application shall be given by the applicant in the following man-
ner-
(a) by publication thereof in the State Gazette of each State through which the
route of the projected pipeline passes;
(b) by publication thereof in such newspapers circulating in the areas through
which the route of the projected pipeline passes as the Minister may require;
(c) by posting or delivering the same to the following persons entitled to be car-
rying on operations in the area which would be affected by the grant of a li-
cence-
(i) holders of exclusive prospecting licences, mining rights, oil exploration
licences, and oil prospecting licences;
(ii) lessees of mining leases, temporary mining leases or oil mining leases;
(d) by publication in areas likely to be affected by the licence in such other man-
ner as the Minister may direct,
and by delivering to administrative officers having responsibilities in such area or to such
other officers as the Minister may specify such numbers of copies of such notice as the
Minister may require for distribution to the occupiers or owners of land in the area so
affected who might not otherwise become aware of such notice.
(4) Such notice shall contain a description of the proposed pipeline and its route and
the proposed ancillary installations and shall set out a list of places and times at which
copies of a plan sufficient to identify the land affected thereby may be inspected; and
each copy of such notice shall require that objections (if any) shall be made at least seven
days before the date to be appointed by the Minister for the hearing of objections and
delivered at the places to be appointed by him for such lodgment.
- Notice of objection
(1) Any person whose land or interest in land may be injuriously affected by the
grant of a licence may within the period specified for objections lodge verbally or in
writing at one of the specified addresses notice of objection stating the interest of the ob-
jector and the grounds of objection.
(2) Matters relating to quantum of compensation shall not be material grounds to in-
clude a notice of objection under this section.
(3) It shall be the duty of any public officer who receives a verbal objection in the
course of his duties to record the name and address, interest and grounds of objection of
any person lodging such a verbal objection in accordance with this section.
10. Inquiry and report thereafter
(1) Upon the date fixed for the hearing of objections, the person or persons appointed
by the Minister shall inquire into any such objections, giving all parties concerned an
opportunity to be heard, and a report thereof shall be made without delay to the Minister.
(2) Matters relating to quantum of compensation shall not be material grounds for
objection under this section.
(3) If, after consideration of the report, the Minister considers that the licence should
be granted he shall inform the President accordingly; but if the Minister considers that a
licence should not be granted in respect of the proposed route or any part of it, he shall so
inform the applicant and the objector or objectors concerned, and thereupon the applicant
shall be entitled to receive a permit to survey such other route or routes as he may pro-
pose or to submit an application for a licence in respect of another route and the provi-
sions of Parts II and III of this Act will apply in respect thereof.
11. Rights and obligations of the holder of a licence
(1) A licence shall entitle the holder, his officers, agents, workmen or other servants
with any necessary equipment or vehicles, subject to the provisions of sections 14, 15 and
16 of this Act, to enter upon, take possession of or use a strip of land of a width not ex-
ceeding 200 feet or of such other width or widths as may be specified in the licence upon
the route spec. .fied in the licence, and thereon thereover or thereunder to construct, main-
tain and operate an oil pipeline and ancillary installations.
(2) For the purpose of this Act, an oil pipeline means a pipeline for the conveyance of
mineral oils, natural gas and any of their derivatives or components, and also any sub-
stance (including steam and water) used or intended to be used in the production or re-
fining or conveying of mineral oils, natural gas, and any of their derivatives or compo-
nents.
(3) The power to construct, maintain and operate an oil pipeline shall include a power
to construct, maintain and operate on the route of such pipeline all other installations (re-
ferred to in this Act as “ancillary installations”) that are ancillary to the construction,
maintenance and operation of such pipeline, including road ways, telephone and telegraph
lines (subject to section 4 of the Telegraphs Act), electric power cables (subject to the
provisions of the Electricity Act), pumping stations, storage tanks and loading terminals.
[Cap. 195 1958 Edition. Cap. E7.]
(4) The holder of a licence shall have power to dig and gel free of charge any gravel,
sand, clay, stone or other similar substance (not being a mineral within the meaning as-
signed thereto in the Minerals and Mining Act) within any land included within the area
covered by the licence to the extent that such gravel, sand, clay, stone or other substance,
will facilitate the construction or maintenance of a pipeline or any ancillary installation.
[Cap. MI2.]
(5) The holder of a licence shall pay compensation-
(a) to any person whose land or interest in land (whether or not it is land in respect
of which the licence has been granted) is injuriously affected by the exercise of
the right conferred by the licence, for any such injurious affection not other-
wise made good; and
(b) to any person suffering damage by reason of any neglect on the part of the
holder or his agents, servants or workmen to protect, maintain or repair any
work, structure or thing executed under the licence, for any such damage not
otherwise made good; and
(c) to any person suffering damage (other than on account of his own default or on
account of the malicious act of a third person) as a consequence of any break-
age of or leakage from the pipeline or an ancillary installation, for any such
damage not otherwise made good,
and if the amount of such compensation is not agreed between any such person and the
holder, it shall be fixed by a court in accordance with Part IV of this Act.
(6) For the removal of doubt it is hereby declared that the powers granted to the
holder of a licence under this Act shall be exercisable only subject to the provisions of
this Act and of any other enactment or rule of law.
12. Power to impose restriction on use of adjoining lands
(1) It shall be lawful for the President upon application by the holder of a licence at
the time of the grant of such licence or at any time thereafter, to make an order ancillary
to such licence prohibiting or restricting the construction of any building or type of
building, or the carrying on of any cultivation or industrial or mining or oil mining activ-
ity or any specified type of cultivation or industrial or mining or oil mining activity
within a specified distance, not exceeding 100 feet, from the boundaries of the land or of
any part of the land in respect of which such licence is granted.
(2) An order made in accordance with the provisions of this section shall be deemed
to be part of the licence to which it is ancillary and the provisions of this Act shall apply
accordingly, and in the event of an application for such an order being made after the
grant of the licence to which it is ancillary, the provisions of sections 8, 9 and 10 of this
Act shall apply as though the application were for a new licence.
13. Deviations
(1) The right to make a deviation from the route specified in the licence may be
granted at any time by the President either by amendment of the licence or by a new li-
cence.
(2) Sections 8, 9 and 10 of this Act shall apply to an application in respect of a de-
viation from the route specified in the licence as though it were an application for a new
licence:
Provided that where the Minister thinks fit, the Minister may approve in respect of
minor deviations an agreement reached between the holder of the licence and any person
or persons whose land or interest in land may be injuriously affected by such minor de-
viations.
(3) The grant of the right to make a deviation under this section shall not invalidate or
make illegal any act done by the holder of the licence prior to such grant, nor prejudice
the rights of any person under this Act with reference to any act done by the holder prior
to such grant.
14. Restrictions in respect of certain public facilities
A licence shall not, except so far as may be expressly permitted by the terms of the li-
cence, authorise the holder to-
(a) construct any works upon any land which is the site of or is within fifty yards
of any public road, dam, reservoir or building belonging to or occupied by the
Federal or a State Government or local government, or upon any land appro-
priated for any railway or situate within 100 yards of any railway; or
(b) make such alteration in the flow of water in any navigable waterway, or con-
struct such works in, under or over any navigable waterway, as might obstruct
or interfere with the free and safe passage of vessels, canoes or other craft; or
(c) construct such works in, under or over, or deposit such material in or make
such alteration in the flow of water required for domestic, industrial or irriga-
tional use as would diminish or restrict the quantity of water available for such
purpose, or construct such works or make such deposit in any waterway as
would cause flooding or erosion,
without the prior permission in writing of the Minister or of such officer as may be nomi-
nated by the Minister.
15. Restrictions upon entry in respect of venerated land
(1) A licence shall not authorise any person to enter upon, take possession of or use
any of the following lands unless the owners or occupiers or the persons in charge thereof
have given their prior assent-
(a) any land occupied by any burial ground or cemetery;
(b) any land containing any grave, grotto, area, tree or thing held to be sacred or
the object of veneration.
(2) If any doubt shall arise whether any lands fall within those described in this sec-
tion, or who the owners or occupiers or persons in charge thereof are, the decision of the
High Court shall be final.
16. Obligations in respect of accommodation works
(1) The holder of a licence shall make and maintain for the accommodation of the
owners or occupiers of any land in respect of which the licence has been granted or of the
owners or occupiers of adjoining land or for the accommodation of the users of any cus-
tomary track or path, such crossings, bridges, culverts, drains or passages as may be nec-
essary for the purpose of making good any interruption to the use of such land or the
amenities thereof or to the use of such customary track or path caused by the exercise of
the powers granted in accordance with this Act:
Provided that it shall not be necessary to make good any interruption in respect of
which compensation under this Act has been paid:
Provided further that upon accommodation works being provided in accordance
with the provisions of this section no further accommodation works shall be necessary in
respect of any change of use of any land or deviation of any track or path or any other act
or omission of any person not being the holder of the licence or his agent, workman or
servant.
(2) The holder of a licence may for the purpose of exercising the powers conferred
upon him, alter the level or position of any pipe, conduit, watercourse, drain, or electric,
telephone or telegraph wire or post, but shall give reasonable notice of his intention so to
do to the person in control thereof and shall execute the work to the reasonable satisfac-
tion of that person.
(3) Where there is a danger that a tree standing near an oil pipeline may fall and
damage such pipeline or an ancillary installation, the holder of the licence may after giv-
ing notice to an administrative officer having responsibility in the area, fell the tree or
otherwise deal with it, and in such event shall upon application by any person interested
in the tree pay such compensation as such officer shall consider necessary.
17. Terms and conditions of licences
(1) A licence may be granted for such period not exceeding twenty years as the Min-
ister may direct.
(2) Nothing in subsection (1) of this section shall affect the validity of any licence
granted before the commencement of this Act for a period exceeding twenty years and
every such licence shall, unless earlier revoked, be valid for the period for which is was
granted.
(3) The holder of a licence may at any time during the term of the licence determine
the licence in respect of all or any part of the land included therein by giving to the Min-
ister not less than three months’ previous notice in writing to that effect.
(4) Every licence shall be subject to the provisions contained in this Act as in force at
the date of its grant and to such regulations concerning public safety, the avoidance of
interference with works of public utility in, over and under the land included in the li-
cence and the prevention of pollution of such land or any waters as may from time to
time be in force.
(5) In the absence of express provision to the contrary, a licence shall be deemed to
include the following conditions to be performed and observed by the holder-
(a) to commence the construction of an oil pipeline within a period to be specified
by the Minister and to complete the same and all necessary ancillary installa-
tions with reasonable despatch, and to maintain the same during the currency
of the licence;
(b) to allow free access to any public officer authorised by or on behalf of the
Minister in writing, to enter and inspect any work, structure or thing made or
done in accordance with the licence;
(c) to indemnify the Minister against any claims arising from injury to any person
or damage to any public or private property as a result of any act or thing done
by the holder of the licence or his agents, servants or workmen in accordance
with the licence;
(d) not to assign, sublet, mortgage or otherwise part with the licence or any right
or interest there under without the previous consent in writing of the Minister.
(6) Every licence shall be deemed to include a provision that any question or dispute
arising between the President or the Minister and the holder of the licence regarding the
licence or any matter connected therewith shall, if it cannot be resolved by agreement, be
referred to arbitration.
18. Use of oil pipeline by a person other than the owner
(1) An application may be made to the Minister with respect to an oil pipeline con-
structed, maintained and operated in pursuance of a licence granted under this Act by any
person other than the owner of the pipeline who seeks a right to have conveyed by the
pipeline on his behalf any of the things mentioned in subsection (2) of section 11 of this
Act which the pipeline is designed to convey.
(2) Every such application shall be made in the prescribed manner and form con-
taining the prescribed particulars.
(3) The Minister shall consider every such application in consultation with the appli-
cant and the owner of the pipeline to which the application relates.
(4) If upon such consideration the Minister is satisfied that the pipeline could, with-
out prejudice to the proper and efficient operation thereof for the purpose of the convey-
ance on behalf of the owner, in the quantity required by him, of the thing which it is de-
signed to convey, be so operated as to permit of the conveyance thereby on behalf of the
applicant of the thing the right to the conveyance of which is sought by the applicant, the
Minister shall declare that he is so satisfied.
(5) Subject to the subsequent provisions of this section, the conditions of the use of
the pipeline by the applicant may be determined by agreement between the owner and the
applicant and, failing such agreement, shall, subject as aforesaid, be determined by the
Minister.
(6) Where the Minister makes under subsection (4) of this section a declaration with
regard to a pipeline, he may by notice served on the owner impose such requirements as
he thinks it necessary or expedient to impose for all or any of the following purposes,
namely-
(a) securing to the person whose application resulted in the making of the declara-
tion the right to have conveyed by the pipeline the thing to which the applica-
tion is related;
(b) regulating the charge to be made for the conveyance of such thing by the pipe-
line on behalf of that person;
(c) securing that the exercise of a right secured by virtue of paragraph (a) of this
subsection is not prevented or impeded,
but requirements imposed for the purpose specified in paragraph (a) of this subsection
shall be so framed as, in the Minister’s opinion, to secure that compliance therewith will
not prejudice the proper and efficient operation of the pipeline for the purpose of the con-
veyance on behalf of the owner thereof, in the quantity required by him, of the thing
which it is designed to convey.
(7) A notice served on the owner of a pipeline under subsection (6) may authorise
such owner to recover, from the person to whom a right is secured by the notice by virtue
of paragraph (a) of that subsection, payments of such amounts as may be determined in
accordance with provisions in that behalf contained in the notice, being payments in con-
sideration of the rights being secured to such person.
(8) If the owner of a pipeline fails to comply with a requirement imposed by a notice
served on him under subsection (6) of this section with reference to the pipeline, he is
guilty of an offence and liable on summary conviction to a fine not exceeding N1 ,000;
and, if the failure continues after his conviction he is guilty of a further offence and li-
able, in respect thereof, to a fine not exceeding fifty naira for each day on which the fail-
ure continues.
(9) The Minister may by notice to the owner of a pipeline whose failure to comply
with any such requirement as aforesaid continues after his conviction of a first offence
under subsection (8) of this section revoke the licence of such owner.
PART IV
Compensation
19. Court having jurisdiction as to compensation
If there be any dispute as to whether any compensation is payable under any provision
of this Act or if so as to the amount thereof, or as to the persons to whom such compen-
sation should be paid, such dispute shall be determined by a magistrate exercising civil
jurisdiction in the area concerned if such magistrate has in respect of any other civil mat-
ter monetary jurisdiction of at least as much as the amount of compensation claimed, and
if there he no such magistrate, by the High Court exercising jurisdiction in the area con-
cerned and, notwithstanding the provisions of any other Act or law, in respect of the deci-
sion of a magistrate in accordance with this section there shall be an appeal to the High
Court of the State and in respect of a decision of the High Court of the State under this
section, whether original or appellate, there shall be an appeal to the Court of Appeal:
Provided that nothing in this Act shall be deemed to confer power upon a magis-
trate to exercise jurisdiction in a matter raising any issue as to the title to land or as to the
title to any interest in land.
20. Basis of assessment of compensation
(1) If a claim is made under subsection (3) of section 6 of this Act, the court shall
award such compensation as it considers just in respect of any damage done to any
buildings, crops or profitable trees by the holder of the permit in the exercise of his rights
thereunder and in addition may award such sum in respect of disturbance (if any) as it
may consider just.
(2) If a claim is made under subsection (5) of section 11 of this Act, the court shall
award such compensation as it considers just, having regard to–
(a) any damage done to any buildings, crops or profitable trees by the holder of
the licence in the exercise of the rights conferred by the licence; and
(b) any disturbance caused by the holder in the exercise of such rights; and
(c) any damage suffered by any person by reason of any neglect on the part of the
holder or his agents, servants or workmen to protect, maintain or repair any
work, structure or thing executed under the licence; and
(d) any damage suffered by any person (other than as stated in such subsection (5)
of this section) as a consequence of any breakage of or leakage from the pipe-
line or an ancillary installation; and
(e) loss (if any) in value of the land or interests in land by reason of the exercise of
the rights as aforesaid,
and also having regard to any compensation already awarded in accordance with subsec-
tion (1) of this section.
(3) In determining the loss in value of the land or interests in land of a claimant the
court shall assess the value of the land or the interests injuriously affected at the date im-
mediately before the grant of the licence and shall assess the residual value to the claim-
ant of the same land or interests consequent upon and at the date of the grant of the
licence and shall determine the loss suffered by the claimant as the difference between
the values so found, if such residual value is a lesser sum.
(4) No compensation shall be awarded in respect of unoccupied land as defined in the
Land Use Act, except to the extent and in the circumstances specified in that Act.
[Cap. L5.)
(5) In determining compensation in accordance with the provisions of this section the
court shall apply the provisions of the Land Use Act so far as they are applicable and not
in conflict with anything in this Act as if the land or interests concerned were land or in-
terests acquired by the President for a public purpose.
(6) If the total sum awarded by the court in accordance with this section exceeds an
amount already offered to the claimant by the holder of the licence the court may order
such holder to pay the costs of the proceedings; and if the sum so awarded does not ex-
ceed the amount offered by such holder the court shall either order the claimant to pay the
cost of the proceedings or order each side to bear its own costs.
(7) Compensation (if any) awarded by the court in accordance with this section shall
be a sum of money payable forthwith or shall consist of periodical instalments or partly
one and partly the other:
Provided that nothing contained in this subsection shall preclude the court award-
ing additional compensation upon subsequent application if loss or damage from the op-
eration of the oil pipeline be proved and the court is of opinion that such loss or damage
is loss or damage not contemplated at the date of the original award.
21. Compensation where local community interested
Where the interests injuriously affected are those of a local community, the court may
order the compensation to be paid to any chief, headman or member of that community
on behalf of such community or that it be paid in accordance with a scheme of distribu-
tion approved by the court or that it be paid into a fund to be administered by a person
approved by the court on trust for application to the general, social or educational benefit
and advancement of that community or any section thereof.
22. Parties in possession as owners to be deemed entitled to lands
If any question arises respecting the title to the lands affected under this Act, the par-
ties in possession as being the owners thereof, or in receipt of the rents of such lands as
being entitled thereto at the time of service of notice under section 6 or 8 of this Act, as
the case may be, shall be deemed to have been lawfully entitled to such lands, unless the
contrary be shown to the satisfaction of the court, and they and all parties claiming under
them or consistently with their possession shall be deemed entitled to any compensation
payable under this Act, hut without prejudice to any subsequent proceedings against such
parties at the instance of any person claiming to have a better right thereto.
23. Exoneration upon payment
The payment to any person to whom any compensation shall be paid or the payment
into court of any compensation upon a decision of the court shall effectually discharge
the person making such payment from seeing to the application or being answerable for
the misapplication thereof:
Provided that where any person is in possession of any land affected by the provi-
sions of this Act by virtue of any estate less than an estate of inheritance, or where any
person is in possession thereof in any fiduciary or representative character, the compen-
sation may be paid to such person and in such proportions and instalments and after such
notices as the court may direct.
PART V
Miscellaneous
24. Proceedings where possession of land withheld
If any person hinders or obstructs any person duly authorised in accordance with the
provisions of this Act from entering upon or taking possession of or using any lands in
pursuance of this Act, the person so hindered or obstructed may apply ex parte at any
time to the High Court exercising jurisdiction in the area for a writ of possession and such
court may issue a writ of possession addressed to the sheriff under which any officer of
the sheriff or police officer may forthwith eject any person so withholding possession.
25. Penalty for hindering the taking possession of lands, etc.
Every person who shall wilfully hinder or obstruct any person duly authorised from
entering upon or taking possession of or using any land in pursuance of the provisions of
this Act, or who shall molest, hinder or obstruct such person when in possession of such
lands, or shall hinder or obstruct any officer of the sheriff or police officer when execut-
ing a writ of possession, shall be liable on summary conviction to a fine of N50 or to
imprisonment for three months.
26. Deviation when land required for public purposes
It shall be lawful for the Minister to require deviation of the route of an oil pipeline so
far as it affects any land required for a public purpose by the Government of the Federa-
tion or the Government of a State upon such terms as to compensation, or otherwise, as
shall be agreed with the holder, or failing such agreement, as may be arrived at by arbi-
tration.
27. Effect of breach of terms or conditions
(1) If there shall be a breach of any of the terms or conditions upon which a licence
has been granted, the Minister may by notice in writing require the holder of the licence
to remedy such breach within such period, being not less than three months, as may be
specified in such notice.
(2) If the holder of the licence shall fail within the period so specified to remedy such
breach the Minister may by notice to the holder revoke the said licence, without prejudice
to anything lawfully done thereunder and without prejudice to any claims for compensa-
tion against the holder made in accordance with the provisions of this Act.
28. Disposal of pipeline and installations on termination of licence
(1) Upon the expiration or sooner determination of a licence, the holder of the licence
shall before or within three months after the termination of such licence be at liberty upon
giving three weeks’ notice to the Minister to remove such pipeline and any ancillary
installation to the extent that the Minister does not elect to purchase such pipeline or any
such installation or any part thereof; and in the event of the Minister and the holder of the
licence not agreeing as to the purchase price the same shall be determined by arbitration.
(2) The holder of a licence shall make good any damage done to the land included in
the licence by removal of a pipeline or ancillary installation.
29. Sale of licence by court to be approved by Minister
No licence granted under this Act shall be sold by or under the orders of a court in
execution of a decree or otherwise howsoever, except to a purchaser approved in writing
by the Minister and under terms to be approved by the Minister.
30. Effect of this Act upon other enactments
(1) A copy of any permit to survey and of any licence granted under this Act, certi-
fied by the Permanent Secretary having supervision over the department of the Federal
Government carrying out the provisions of this Act to be a true copy, together with any
plans or documents that may be prescribed by regulations made under this Act, shall be
delivered by the holder of such permit or licence to the registry established under the
Land Use Act for each State to which such permit or licence relates.
[Cap. L5.]
(2) The provisions of the Land Use Act shall not apply to any such permit or licence,
but any such permit or licence shall in so far as it affects any land take effect as against
other instruments affecting the same land as though it had been registered under that Act
upon the date of the grant of such permit or licence.
(3) The grant of a permit or licence under this Act shall not be invalid by reason of
any provision of the Land Use Act nor shall a permit or licence be subject to any provi-
sion of either of such Acts.
31. Fees
(1) The applicant for a permit to survey shall pay a fee of twenty naira upon submit-
ting his application, and a fee of fifty naira upon the grant of such permit.
(2) The applicant for a licence shall pay a fee of fifty naira upon submitting his appli-
cation, and a fee of N200 upon the grant of such licence.
(3) The holder of a permit shall pay a fee of N 50 in respect of each variation of such
permit.
(4) The holder of a licence shall pay a fee of N 200 in respect of each variation of
such licence.
(5) An annual fee shall be paid on each licence of twenty naira per mile of the length
of the pipeline subject to a minimum of N 200.
(6) The holder of a licence shall pay a fee of N 100 upon submitting his application
for a restriction order under section 12 of this Act, and a fee of such amount as the Min-
ister may determine not exceeding N 400 on such order being made.
32. Offences by bodies corporate
Where an offence under this Act which has been committed by a body corporate is
proved to have been committed with the consent or connivance of, or to be attributable to
any neglect on the part of, any director, manager, secretary, or other similar officer of the
body corporate, or any person purporting to act in any such capacity, he, as well as the
body corporate, shall be deemed to be guilty of that offence and shall be liable to be pro-
ceeded against and punished accordingly.
33. Regulations
The Minister may by regulation prescribe-
(a) the manner in which any application in accordance with the provisions of this
Act shall be made and the forms to be used;
(b) the manner in which the holders of exclusive prospecting licences, mining
rights and mining leases granted under the Minerals and Mining Act or a li-
cence granted under the Nigerian Coal Corporation Act or licences or leases
granted under the Minerals and Mining Act may operate over an area subject
to an oil pipeline licence and the manner in which the area covered by an oil
pipeline licence may infringe on the area subject to an exclusive prospecting
licence, mining right or mining lease or other licence or lease so granted;
[Cap. M 12. Cap. N95.]
(c) measures in respect of public safety, the avoidance of interference with works
of public utility in, over and under any land and the prevention of pollution of
any land or water;
(d) such matters relating to the construction, maintenance and operation of oil
pipelines as the Minister considers it necessary or appropriate to prescribe;
(e) generally for carrying into effect the purposes and provisions of this Act.
34. Delegation of powers of Minister
The powers conferred on the Minister by this Act, or any of them, may be exercised
by any officer of the Ministry of Petroleum Resources designated in that behalf by the
Minister.
SUBSIDIARY LEGISLATION
List of Subsidiary Legislation
1. Oil and Gas Pipelines Regulations.
OIL AND GAS PIPELINES REGULATIONS
ARRANGEMENT OF REG ULATIONS
PART 1
Preliminary
REGULATION
1. Permit to survey pipeline route, etc.
2. Application for licence to construct and operate a pipeline.
PART II
Design, construction and inspection, etc., of oil pipelines
- Pipeline design.
- Standard of design.
- Construction of pipeline.
- Commencement of inspection and testing.
- Inspection and testing guidelines.
- Environmental protection guidelines.
- Operating and maintenance guidelines.
- Design of cathodic protection.
- Maintenance of the cathodic protection system.
- Cathodic protection system.
- External corrosion control.
- Internal corrosion control.
- Monitoring of internal corrosion.
PART III
Gas transmission and distribution pipelines
- Guidelines for design, etc.
- Construction.
- Use of cast-iron material.
- Use of plastic material.
- Operation and maintenance.
PART IV
Procedure for upgrading pipeline or changing substance transmitted by pipeline
- Application for upgrading pipeline, etc.
- Change of substance transmitted by the pipeline.
PART V
Discontinuation, abandonment and resumption of operation of pipeline system
23. Discontinuation.
REGULATION
- Abandonment and removal of pipeline.
- Resumption of operation of abandoned or discontinued pipeline.
PART VI
Miscellaneous
- Offences.
- Interpretation.
- Citation.
OIL AND GAS PIPELINE REGULATIONS
[S.1. 14 of 1995.]
[17th June, 1995]
[Comrnencernent.]
PART I
Preliminary
- Permit to survey pipeline route, etc.
(1) No oil pipeline licence shall be granted or renewed unless the route of-
(a) the pipeline has been surveyed; or
(b) in the case of a renewal, the pipeline has been re-surveyed.
(2) No surveyor re-survey shall be carried out under paragraph (1) of this regulation
unless a permit to survey has been obtained in accordance with the provisions of sections
4 and 5 of the Oil Pipelines Act.
[Cap. 07.]
(3) An application for a permit to survey shall be accompanied with ten copies of the
topographical map of the proposed route of the pipeline drawn on scale-
(a) I :50,000, for a pipeline that is not more than fifty kilometres long;
(b) I: 100,000, for a pipeline that is over fifty kilometres but not more than 100
kilometres long; and
(c) I :250,000, for a pipeline that is over 100 kilometres long.
- Application for licence to construct and operate a pipeline
(1) Application for a licence to construct a pipeline shall-
(a) be made during the validity of a permit to survey; and
(b) be in accordance with the provisions of Part III of the Oil Pipelines Act.
(2) The application shall also be accompanied with the following, that is-
(a) a statement indicating-
(i) the services to be rendered by the pipeline;
(ii) the specification of the pipeline;
(iii) the characteristic of the fluids to be conveyed through the pipeline; and
(iv) the total estimated cost of construction of the pipeline;
(b) a survey description, in accordance with the Nigerian National Grid, of the
total route of the pipeline, indicating the width of the right of way, with the co-
ordinates of the various points of intersection;
(c) ten copies of the plan of the pipeline showing-
(i) the proposed route of the pipeline marked in red and the sections and
quarter sections;
(ii) the location of each point at which there is a change in the outside or
the nominal diameter of the pipeline, the wall thickness of the pipeline
material, the type and grade of the pipeline and the designed maximum
operating pressure;
(iii) the direction of fluid flow along the pipeline;
(iv) the location, shown by symbols, of any installation along the pipeline;
(v) the location of the points at which the new pipeline would cross any
other pipeline, stating the owner of the pipeline being crossed;
(vi) the relative position of any existing pipeline in the same right of way of
the new pipeline;
(vii) any pipeline within a distance of 1 00 metres of the new pipeline, stat-
ing the owner of that pipeline;
(viii) the regional topography of the area along the pipeline route, within a
distance of 100 metres on both sides, including any watercourse that
the new pipeline would cross;
(d) two copies of the plan of the pipeline showing-
(i) the location of any anchor or expansion loop;
(ii) the location and operating details of corrosion prevention devices, main
line valves and any emergency shut-down devices;
(iii) the pig lunching and receiving points and any tie-in-points with oper-
ating details;
(e) a hydraulic profile of the pipeline indicating the position of any pumping or
booster station;
(f) the ancillary facilities along the pipeline or at its terminal ends, including com-
pressor stations, manifolds and metre banks, giving a general description of
each facility and its proposed operation parameter; and
(g) two copies of the plan and profile of the pipeline, indicating the manner in
which the new pipeline would cross any highway, railroad, waterway or any
other pipeline along the route.
(3) No licence to construct a pipeline shall be granted or released unless a list of the
construction companies being considered for the construction work has been submitted to
and approved by the Department of Petroleum Resources (in these Regulations referred
to as “the Department”) in accordance with the provisions of the Petroleum (Drilling and
Production) Regulations 1969, as amended.
[L.N. 69 of 1969.]
PART II
Design, construction and inspection, etc., of oil pipelines
- Pipeline design
(1) The design of a pipeline for the purposes of these Regulations shall be-
(a) such that it shall be suitable for the transportation of liquid petroleum, includ-
ing crude oil, refined products, natural gas liquid condensate and liquified petro-
leum gas; and
(b) as set out in this Part of these Regulations.
(2) The design for the relocation, replacement and upgrading of an existing pipeline
shall also conform with the provisions of paragraph (1) of this regulation.
- Standard of design
(1) The standard of design for the pipeline shall be as follows, that is-
(a) it shall conform with-
(i) the ASTM A 106 Grade B or API 5L Grade B or any acceptable
equivalent standard, as the minimum requirement for a low pressure
range or small diameter pipeline; and
(ii) any of the API 5 LX grade range, for a high working pressure or large
diameter pipeline, where a lower grade would require excessively thick
walls to cope with the desired working pressure;
(b) the pipeline shall be seamless and be Electric Resistance Welded (ERW) or
Double Submerge Arc Welded (DSA W);
(c) the design shall be in accordance with the ANSI/ASME B 31.4-1979 standard
code and any subsequent revision, published by the American Society of Me-
chanical Engineers under the title “Liquid Petroleum Transportation Systems”.
(2) In addition to the pipeline being in conformity with the ANSI/ ASME B 31.4-1979
code special attention shall be paid to the following matters, that is-
(a) where a pipeline is to be laid at sea or river-bed without burial, the wave and
current loads on the pipeline shall be taken into account in the stress calcula-
tion of the pipeline;
(b) where applicable, the calculation of limit stress due to sustained load, thermal
expansion and occasional loads shall conform strictly with paragraphs 402.3.2.
and 402.3.3. of the ANSI/ASME B 31.4-1979 code;
CAP. 07
Oil Pipelines Act
(c) the design and materials selection of the pipeline components, including tees,
elbows, bends, valves and fittings shall in all respects conform with Parts II
and III of Chapter n of the ANSI/ASME B 31.4-1979 code;
(d) no used fitting of an existing pipeline shall be used on a new pipeline unless its
original specification has been identified and confirmed to be capable of per-
forming the new service;
(e) the threaded joints at the internal and external portions of the pipe shall be of
the Tapered Pipe Thread type and conform with the API standard 5B or NPT
threads in accordance with ANSI B2-1;
(f) the least nominal wall thickness of the threaded portion of the pipe shall not be
less than the value specified in ANSI B. 36.10;
(g) all threaded joints of the pipe shall be of those sections of the pipeline that are
above the ground;
(h) if two or more pipelines are to be so connected that one will operate at a pres-
sure higher than the other, they shall be so designed that the pipeline system
operating at the lower pressure shall not be subjected to any pressure greater
than that for which it is licensed;
(i) any pipe fitting valve or equipment connected to the pipeline shall have the
manufacturer’s rating which is equal to or greater than the proposed maximum
operating pressure of the pipeline.
Construction
- Construction of pipeline
The procedure to be followed, the specification requirements and the other matters
that shall be considered in the construction of a new pipeline or in the replacement of an
existing pipeline shall be as follows, that is-
(a) no person granted a licence to construct a new pipeline or replace an existing
pipeline shall begin construction work unless he has given the Department
written notice of his intention to do so;
(b) any metallic pipeline material to be buried shall be coated with-
(i) coal-tar enamel, asphalt enamel, polyethylene tape, epoxy, asphalt mas-
tic, urethane or extruded polyethylene; or
(ii) any other material specially approved by the Department for that pur-
pose;
(c) a surface pipeline shall be painted, raised and maintained above ground on
permanent supports;
(d) the pipeline construction shall-
(i) follow the steps outlined in Chapter V of the ANSI/ASME B 31.4- 1979 code; and
(ii) be carried out in a way that shall cause the least disturbance to the en-
vironment;
(e) special precautions shall be taken to protect the pipeline from wash-ours, un-
stable soil, landslide or any other hazards that may cause the pipeline to shift
or be subjected to abnormal loads;
(f) ditching for the pipeline shall be in accordance with good pipeline practice;
(g) consideration for public safety shall be in accordance with the provision of
APRP 1102 or any other recognised equivalent standards;
(h) the minimum soil coverage of a pipeline shall be-
(i) in the case of dry land, 0.9 metre;
(ii) in the case of a river crossing and river-beds, 1 metre;
(iii) in the case of drainage ditch, railroad and highway crossing, 1.2 metres;
(iv) in the case of a rocky area, 0.6 metre;
(v) in the case of a swamp, 0.6 metre; and
(vi) in the case of a shipping channel, 1.5 metres;
(i) the pipeline welding shall be in accordance with the provisions of API
110411107 and welding inspection shall be by non-destructive method using
the radiographic method set out in API 1104-1973 or its subsequent editions;
(j) in addition to the specific requirements of the relevant government agency
responsible for railroad and highway crossings, the following precautions shall
be taken at railroad and highway crossings, that is-
(i) any installation of carrier pipe or casing shall be in accordance with API RP 1102;
(ii) the casing shall either be insulated from its carrier pipe support and
extend to both sides of the railroad or highway or the crossing shall be
of a thicker wall pipeline covered with compacted fill and protective
reinforced concrete slab;
(iii) a surface line shall be similarly buried with casing protection or special
construction as specified in sub-paragraph (ii) of this paragraph at such
crossings;
(iv) a pipeline warning sign shall be conspicuously displayed by the licen-
see at the entry and exit points of the railroad, highway, river or any
other pipeline crossing;
(k) the licensee shall, before commencing any ground disturbance in a populated
or controlled area-
(i) locate the position and alignment of the pipeline with marking and distinguishable warning signs at such intervals as may be specified by the Department;
(ii) identify any pipeline within thirty metres radius of its area of ground
distance during the construction of the pipeline;
(l) if there is an indication that a pipeline is within thirty metres radius of the
pipeline or a pipeline crossing, the licensee or any other person undertaking
construction within that radius shall locate the pipeline and mark it so that it
can be identified and avoided by the construction equipment and no person
shall excavate within one metre radius of the pipeline so located;
(m) the Department may direct that an existing pipeline or pipeline crossing lo-
cated within the construction zone of the new pipeline in a populated or con-
trolled area shall, during the period of ground disturbance in its vicinity, be-
(i) completely depressurized; or
(ii) operated at reduced pressure; or
(iii) otherwise protected;
(n) mainline block valves shall be installed-
(i) on the upstream side of major river crossings;
(ii) at pump stations; and
(iii) at other sensitive locations of the pipeline, including industrial, com-
mercial and densely populated areas where construction activities may
pose particular risks of damage to the pipeline, the right of way of the
pipeline shall be clearly marked in those areas with signs for ease of
iderui fication;
(iv) check valves shall be installed on the downstream of river crossings;
(v) the licensee shall, not later than six months after completion of con-
struction, submit two copies of the as-built plan of the pipeline on the
same scale as that of the plan submitted with the application for the
pipeline licence.
Inspection and testing
- Commencement of inspection and testing
The licensee shall, on completion of the construction of the pipeline, give the Depart-
ment not less than seven days’ notice of its intention to commence inspection and testing
of the pipeline.
- Inspection and testing guidelines
The guidelines for the inspection and testing of a pipeline are as follows, that is-
(a) the pipeline shall be inspected visually and examined radiographically in ac-
cordance with the procedure set out in Chapter VI of the ANSI ASME B 31.4
1979 code or its subsequent revisions;
(b) pressure tests shall be conducted by hydrostatic method and in such manner as
shall ensure the protection of life, property and the general environment of the
pipeline;
(c) the entire length of the pipeline shall be tested to the designed rated pressure;
(d) an in-line pressure vessel or a pre-fabricated manifold on the pipeline shall be
tested to the manufacturer’s specifications in accordance with the Mineral Oils
(Safety) Regulations 1963;
[LN. 45 of 1963.)
(e) the pressure recording instruments to be used for testing shall have a valid
calibration certificate which shall not be more than a year old;
(f) the accuracy of the pressure recording instrument shall be within two per cent
of its range;
(g) the chart record of the test shall be continuous and legible and the test result
and any remedial action taken shall be submitted to the Department for ap-
proval before the pipeline is commissioned;
(h) except with the permission of the Department, the duration of pressure tests-
(i) shall not be less than 24 hours of continuous testing in the case of leaks
and material failures, and
(ii) may be less than 24 hours of continuous testing but not less than one
hour in the case of buried pipelines of not more than 100 metres in
length and all surface running pipelines;
(i) all buried pipelines shall be tested to a pressure of not less than 1.25 times the
maximum designed operating pressure;
(j) surface pipelines transmitting liquid petroleum or gas shall be tested up to a
pressure of not less than 1.4 times the maximum designed operating pressure;
(k) unless otherwise authorised or permitted by the Department-
(i) the actual test pressure throughout the duration of the test shall not ex-
ceed 1 10 per cent of the minimum yield strength of the pipe material
and the test equipment shall appropriately be pre-set not to produce
above that pressure;
(ii) the test medium shall be water;
(iii) the pipeline shall be tested to a minimum pressure of not less than 700 kilopascals;
(l) the maximum test pressure in all cases shall not result in a hoop stress greater
than 110 per cent of the specified maximum yield strength of the pipe material
based on its nominal wall thickness; and
(m) valves and fittings on the pipeline shall not, during the test, be subjected to a
pressure greater than the manufacturer’s test pressure rating.
8. Environmental protection guidelines
Where-
a) the test pressure results in a hoop stress greater than 75 per cent of the speci-
fied minimum yield strength of the pipeline based on its nominal wall thick-
ness; or
(b) the pipeline crosses or passes within 100 metres of a watercourse, the operator
shall assure the Department that adequate contingency plans have been made
for protecting the environment.
Operation and maintenance
- Operating and maintenance guidelines
The guidelines for the operation and maintenance of the pipeline are as follows, that
is-
(a) a licensee shall-
(i) not begin to operate a pipeline unless he has obtained the approval of
the Department;
(ii) establish a written emergency plan for implementing in the event of
systems failure, accidents or other emergencies;
(b) an emergency plan established under sub-paragraph (a) (ii) of this paragraph
shall include procedures for prompt and expedient remedial action for-
(i) the safety of the personnel of the operating company and of the public;
(ii) the protection of property and the environment;
(iii) the control of accidental discharge from the pipeline; and
(iv) the adequate training of personnel for the handling of emergencies;
(c) the maximum steady state operating pressure and static condition shall not
exceed-
(i) the internal design pressure; or
(ii) the pressure ratings of the components,
whichever is less, and the pressure surges or the momentary pressure variations shall not
exceed ten per cent;
(d) pipeline markers at crossings shall indicate the location of the pipeline and the
name of the operating company;
(e) all pressure relief devices shall be-
(i) activated after installation to ensure that they function properl
(ii) inspected and re-certified once in 26 months, and the report of the in-
spection and re-certification shall be sent to the Department;
(f) the right of way shall be maintained to provide a clear visibility and give reasonable access to the maintenance crew;
(g) clear access shall be maintained to valves locations, and ditches shall be pro-
tected against washout of the pipeline;
(h) the right of way shall be regularly patrolled for prompt detection of any line-
break, encroachment or any other situation that may endanger the safety of the
pipeline;
(i) any line-break, encroachment or dangerous situation detected under sub-
paragraph (h) of this paragraph shall be promptly reported to the Department;
(j) all underwater crossings shall be inspected not less than once in five years to
ensure that-
(i) there is sufficient cover for the pipeline; and
(ii) the safety of the pipeline at the crossing is not endangered in any way;
(k) any repair to the pipeline shall be carried out in accordance with-
(i) good pipeline practice; an
(ii) the safety provisions contained in the standards API RP 1107 and API
RP 1111 or their recognised equivalent standards;
(l) the repaired section of the pipeline shall be pressure-tested at the same ex-
pected operating conditions relating to a new pipeline;
(m) the riser installation or an offshore pipeline connected to a platform shall be
visually inspected every year for physical damage or corrosion in and above
the splash zone;
(n) the record of an inspection under sub-paragraph (m) of this paragraph shall be
kept on location for verification, whenever the need arises.
Cathodic protection and corrosion control
10. Design of cathodic protection
The design for the cathodic protection from external and internal corrosion of a fer-
rous pipeline and its components shall be in accordance with the specifications and pro-
cedures prescribed in the NACE RP 0169-89 or equivalent standards.
11. Maintenance of the cathodic protection system
(1) The cathodic protection system shall-
(a) be maintained in a serviceable condition; and
(b) be electrically tested at least once in two years.
(2) Where a test under paragraph (1) (b) of this regulation reveals a weakness in the
cathodic protection system, appropriate measures shall be taken and a report of the test
and the measures taken shall be promptly sent to the Department.
(3) All sources of impressed current such as rectifiers and other associated devices in
the cathodic protection system, shall be inspected and tested every four months to ensure
their proper functioning.
12. Cathodic protection system
(1) The cathodic protection system shall be provided by a galvanic anode or an im-
pressed current anode system which shall-
(a) be installed in such a way that it mitigates corrosion; and
(b) contain a method of determining the degree of cathodic protection achieved on
the pipeline.
(2) The criteria for selecting the appropriate protection system shall be as listed in
paragraph 7.5 of section 7 of the NACE Standard RP 169-83.
(3) A cathodic protection system shall be-
(a) installed not later than one year after the laying of the pipeline and in such a
way that the pipe coatings at the point of installation are kept intact;
(b) electrically isolated at all inter-connections to other pipeline systems or struc-
tures except where the two structures are mutually protected by the same sys-
tem;
(c) protected against damage by atmospheric electrical discharges, underground
cables and power-lines.
(4) Except for underwater pipelines, sufficient test leads shall be installed at test sta-
tions of buried pipelines for the periodic checks of the effectiveness of the cathodic pro-
tection system which shall be carried out by electrical measurements.
(5) A minimum distance of three metres shall be maintained between the electric
transmission tower footings, ground cables and earthings, power-lines and the pipeline
being protected.
(6) For the purposes of paragraph (4) of this regulations, “test stations” includes all
pipe casing installations, insulating joints, crossing and main manifold junctions.
13. External corrosion control
The guidelines for the application of coating to the pipeline and its cathodic protection
for the control of external corrosion of a buried or submerged pipeline are as follows, that
is-
(a) the coating shall-
(i) be applied in such a way that it will mitigate corrosion and effectively
resist under-film migration;
(ii) be ductile and strong enough to resist cracking and damage during
handling and under soil stress;
(iii) be compatible with any supplemental cathodic protection;
(iv) if it is on insulating type material, have low moisture absorption;
(v) be applied in such a way that no irregularities protrude through it and
no holiday gaps exist anywhere on the pipeline;
(b) the points of connection of any attachment to the pipeline shall be sealed with
the coating.
14. Internal corrosion control
(1) This guidelines for the corrosion control of a pipeline are as follows, that is-
(a) no corrosive material shall be transported in a pipeline unless appropriate
measures have been taken to mitigate the corrosive effect of the material on the
internal coating of the pipeline;
(b) internal corrosion shall be prevented by-
(i) frequent pigging, inhibiting or scraping; or
(ii) the application of internal coating on the pipeline before it is laid.
(2) Whichever method is used under paragraph (1) (b) of this regulation, appropriate
precaution shall be taken, for example-
(a) in the case of inhibition of the pipeline, sufficient coupon holders shall be
used; and
(b) in the case of application of internal coating, the established industry standards
of internal coating material shall be complied with.
15. Monitoring of internal corrosion
(1) Internal corrosion in a pipeline shall be monitored by running an intelligent pig or
other internal survey instrument through the pipeline at least once in five years.
(2) A report of a monitoring survey carried out under paragraph (l) of this regulation
shall be sent to the Department.
PART III
Gas transmission and distribution pipelines
16. Guidelines for design, etc.
The guidelines for the design, fabrication, installation, inspection, testing, operation
and maintenance of a gas transmission and distribution pipeline required to operate with
metal temperature of between 450 of and minus 20 of shall be as follows, that is-
(a) the standard of design shall be in accordance with the specifications of
ANSV/ASME B31.8-1986 titled “Gas Transmission and Distribution Pipe
Systems” or its later editions;
(b) all structural materials, valves, fittings, bolting and tubing to be used shall gen-
erally conform with the specification in Appendix B of the reference standard
ASMEB31.8;
(c) the gas pipeline shall be generally seamless or of the ERW (Electric Resistance
Welded) and DSA W (Double Submerged Arc Welded) types;
(d) the use of thermoplastic and thermosetting pipe materials may be acceptable if
they conform with the ASTM specifications 02513 and 02517 respectively and
are inhibited against material degradation effects by ultra-violet rays if used in
locations where the pipeline is exposed to sunlight;
(e) the weldability of the ferrous pipe materials shall be tested in accordance with
the requirements of API standard 1104;
(f) adequate provisions shall be made for-
(i) the flexibility of the pipeline while under pressure in the form of an-
chorage and guide points; and
(ii) temperature-induced stresses by allowing for expansion joint coup-
lings.
17. Construction
The guidelines for the construction of a new gas pipeline or for the replacement of an
existing gas pipeline shall be as follows, that is-
(a) the design and construction of a pipeline and its corresponding corrosion
control installation shall be in accordance with the Standards and codes
specified in ANSI/ASME B 13.8, and in the National Association of Corrosion
Engineers Standard RP 0169-83, generally referred to as NACE Standard
RP 0169-83;
(b) a long distance gas transmission pipeline shall be made of steel and its design
and construction shall be governed by the population density indices specified
in ANSI/ASME B31.8 and the corresponding design factor;
(c) where a type of construction is specified for a pipeline in the proximity of
main roads and railroads and their mode of crossings, the pipeline shall be
constructed to those specifications;
(d) the minimum depth of burial of the pipeline shall be specified in regula-
tion 5 (h) of these Regulations but where-
(i) the minimum depth cannot be achieved; or
(ii) the pipeline would be exposed to excessive external loads, the pipeline,
at those points, shall be encased, bridged or specially reinforced to
withstand any anticipated external loads;
(e) there shall be a minimum clearance of 0.5 metre between the pipeline and any
other underground structure not connected with it;
(f) a buried pipeline shall be protected against corrosion and if a pipeline is to
transport corrosive or toxic gas-
(i) the design parameter of the pipeline shall be such that the gas pressure
in the pipeline at any time shall not result in a hoop stress greater than
sixty per cent of the specified minimum yield strength of the pipeline
material based on its nominal wall thickness; and
(ii) the block valves and check valves for the pipeline shall be so located as
to prevent the escape of the corrosive or toxic gas into the atmosphere
in the event of a pipeline failure;
(g) the inspection of the pipeline construction materials and its appurtenances,
welding, ditching, stringing and the general installation shall be in accordance
with the procedure outline set out in Chapter IV of ANSI/ASME B31.8;
(h) a pipeline laid-
(i) in a farmland, virgin area or sparsely populated area, shall be tested
with water up to a minimum pressure of 125 per cent of its designed
maximum operating pressure or with air up to 110 per cent of its
maximum operating pressure;
(ii) in a densely populated area, shall be tested only with water up to a
minimum pressure of 140 per cent of its designed maximum operating
pressure,and the result of the test shall be sent to the Department;
(i) a pipeline, designed to withstand twenty per cent more of the specified mini-
mum yield strength, shall be tested by using pressurised air or gas between
100 psi to twenty per cent of the minimum specified yield of the material, and
a pipeline designed to operate at below 100 psi shall be leak-tested at the
maximum system pressure.
18. Use of cast-iron material
Cast-iron materials shall not be used for a gas pipeline unless-
(a) specific application, supported with compelling reasons for using the cast-iron
material, has been made to the Department;
(b) the Department has given special approval for the material to be used;
(c) the design is strictly in accordance with the specifications set out In para-
graph 842 of the reference standard ANSI/ASME B31.8.
19. Use of plastic material
(1) Thermoplastic and thermosetting plastic material of the grades specified In
ASTMD 2513 and ASTMD 1217 may be used for laying service lines only.
(2) The guidelines for the use of plastic materials are as follows, that is-
(a) where the value of the plastic design factor is not less than 0.32 for any case,
the design pressure for the plastic gas pipeline shall be in accordance with the
formula given in paragraph 842.31 of ANSI/ASME B31.80;
(b) the plastic materials shall be used in any service where the maximum and
minimum operating temperatures are higher than IOO°F or lower than minus
20 of respectively;
(c) the plastic materials used shall be inhibited against the effect of ultra-violet
rays which renders such materials brittle when exposed to sunlight;
(d) the plastic pipes or tubing shall not be threaded at joints but shall be jointed by
the solvent cement method, adhesive method, heat-fusion or by means of com-
pression coupling or flanging, whichever conforms with the manufacturer’s
specifications;
(e) extreme caution shall be taken in laying plastic pipelines to avoid damage to
the material, consequently;
(f) a buried plastic pipeline of-
(i) 1/2 inch nominal diameter and above, shall have a minimum wall thick-
ness 0.1 inch; and
(ii) below-inch nominal diameter, shall have a minimum wall thickness of not less than 0.06 inch;
(g) a plastic pipeline shall-
(i) be buried in undisturbed or well compacted soil and no mitre bend
shall be permitted at any portion of the pipeline;
(ii) be tested at a pressure of not less than 150 per cent of its maximum
operating pressure or 50 psig, whichever is greater;
(iii) not be subjected on any occasion to a pressure of more than 300 per
cent of its maximum operating pressure.
20. Operation and maintenance
(1) The operation and maintenance of-
(a) the pipeline, shall be as specified in regulation 9 of these Regulations; and
(b) the associated corrosion system, shall be in accordance with the provisions of NACE Standard RP 1069.83.
(2) A pipeline that is not put into use-
(a) after six months of its construction, shall be filled with inert gas or nitrogen;
(b) until after one year of its construction, shall be pressure-tested and certified by
the Department before it is put into use.
(3) The gas pipeline system shall be well purged with water, air or inert gas before
any repair is undertaken and the environment of the repair site shall be monitored con-
stantly with a gas detecting device to ensure adequate safety.
PART IV
Procedure for upgrading pipeline or changing substance transmitted
by pipeline
21. Application for upgrading pipeline, etc.
(1) A licensee who desires to upgrade the maximum operating pressure of his pipe-
line shall make an application to the Department stating the following, that is-
(a) the reason for his desire to upgrade the pressure;
(b) the leak history of the pipeline to be upgraded;
(c) the modification required to be made to the pipeline system to render it quali-
fied for upgrading in accordance with the specifications contained in para-
graph 845 of ANSI/ASME 3.18;
(d) the test that the licensee intends to carry out on the pipeline system in accor-
dance with regulation 16 of these Regulations in which the upgraded maxi-
mum operating pressure shall now be the new parameter to use for the tests;
(e) such other information as the Department may deem necessary to enable it to
take a decision on the application.
(2) The Department may grant approval for the upgrading of the pipeline and its op-
eration at the upgraded operating pressure if the Department is satisfied with the infor-
mation supplied to it under paragraph (1) of this regulation.
22. Change of substance transmitted by the pipeline
(1) Where a licensee desires to change the nature of the fluid transmitted by the pipe-
line, that is-
(a) from liquid petroleum to gas; or
(b) from sweet gas to corrosive gas,
he shall make an application to the Department.
(2) A licensee who makes an application under paragraph (1) of this regulation shall
state-
(a) he reason for desiring the change;
(b) the leak history of the pipeline concerned;
(c) the modification required to the pipeline system to render it capable of performing the new service; (d) such other information as the Department may deem necessary to enable it to undertake a realistic assessment of the application for the purpose of approval.
(3) The Department may grant approval for the change of substance transmitted by
the pipeline if the Department is satisfied with the information supplied to it under para-
graph (2) of this regulation.
PART V
Discontinuation, abandonment and resumption of operation of pipeline system
23. Discontinuation
(1) A licensee who desires to discontinue the operation of the pipeline system or its
ancillary facilities shall apply to the Department giving at least three months’ notice of
his intention to do so.
(2) An application made under paragraph (1) of this regulation shall be accompanied
with-
(a) the reasons for the discontinuation of the pipeline system or its ancillary facili-
ties;
(b) two copies of the plan of the entire pipeline or part thereof in which the opera-
tion is to be discontinued shown in green colour;
(c) the method proposed to be used for the discontinuation of operations.
(3) The Department may, if satisfied with an application made under this regulation,
grant a discontinuation approval upon such conditions as it may determine.
(4) On the grant of an approval made under paragraph (3) of this regulation and sub-
jected to any condition attached to the approval, the pipeline shall be-
(a) disconnected from all other facilities connected to it, including other pipelines,
meter stations, ancillary facilities and appurtenances;
(b) purged of petroleum liquid or gas by using water or inert material and capped
at both ends with moisture resistant materials.
24. Abandonment and removal of pipeline
(1) Where a pipeline is to be completely abandoned, the provisions set out in regula-
tion 23 of these Regulations shall apply.
(2) The right of way of an abandoned pipeline shall continue to be maintained and
clearly identified for as long as the pipeline remains in place.
(3) Where the abandoned pipeline-
(a) is to be removed, the licensee shall send to the Department the proposed work
programme for the removal for approval;
(b) has been removed under sub-paragraph (a) of this paragraph, the licensee shall
restore to perfect condition-
(i) the right of way of the pipeline; and
(ii) any disturbed land area in the vicinity of the pipeline.
25. Resumption of operation of abandoned or discontinued pipeline
(1) A licensee who desires to resume operations in an abandoned or a discontinued
pipeline shall apply to the Department for approval.
(2) An application made under paragraph (1) of this regulation shall be accompanied
with-
(a) the reasons for the resumption of operations; and
(b) the proposed method to be used in reactivating the pipeline.
(3) The Department may, if satisfied with an application made under this regulation,
approve the reactivation of the pipeline under such conditions as it may determine.
(4) A pipeline reactivated under this regulation shall be tested as a new pipeline un-
der the proposed operating conditions of the pipeline.
PART VI
Miscellaneous
26. Offences
(1) A person who contravenes a provision of these Regulation is guilty of an offence
and liable on conviction to a fine of up to N 500, 000 or imprisonment for a term of six
months or to both such fine and imprisonment.
(2) Where an offence under paragraph (1) of this regulation which is committed by a
body corporate is proved to have been committed with the consent or connivance of, or to
be attributable to any neglect on the part of, any director, manager, secretary or other
similar officer, servant or agent of the body corporate (or any person purporting to act in
such capacity), he as well as the body corporate shall be deemed to be guilty of the of-
fence and may be proceeded against and punished in the same manner as an individual
under paragraph (1) of this regulation.
27. Interpretation
In these Regulations, unless the context otherwise requires-
“Department” means the Department of Petroleum Resources in the Ministry;
“DSAW” means Double Submerged Arc Welded;
“ERW” means Electric Resistance Welded;
“Minister“ means the Minister charged with responsibility for matters relating to petro-
leum resources and “Ministry” shall be construed accordingly.
28. Citation
These Regulations may be cited as the Oil and Gas Pipeline Regulations.